Some Mistakes You Should Avoid While Driving, 90% People Get Caught

0
mistakes to avoid while driving

Due to the high beam light coming inside the vehicles, many times the driver of the vehicle coming from the front gets upset. We should use high beam lights only when we are driving on National or Express Highway so that we can see the vehicle coming on the other road from the front, that is, they are often used to see far away. It goes but many times it becomes a problem for the vehicle coming from the front. Due to this, the driver of the vehicle also stops seeing and it can also be the reason for the accident.

We should never use high beams in congested areas. We should always use low Bheem lights only.

The drivers of small vehicles and mid-compact XUV vehicles often get into trouble due to the high beam. Often, while driving at night, they have a lot of trouble due to the light of the high beam light. Because these vehicles are less in terms of height, due to which any truck, bus or high vehicle coming from the front reduces their visibility from High Beem Light. This light greatly affects the driver. The effect of these high beam lights falls directly on the eyes and for some time the vision stops. Due to this type of reason accidents can also happen.

This high beam makes it even more annoying when we are driving in the wrong line at night time. In this article, today we are telling you the ways to avoid these high beam lights, by adopting which you can avoid them.

Tips to avoid high beam light while driving

You can follow these tips to avoid high beam lights that occurs accidents as follows:

  • Avoid driving in the wrong lane: As far as possible, never drive in the wrong lane or in the wrong direction. Driving in the wrong lane by the driver is tantamount to inviting an accident. Many times people drive in the wrong direction in a hurry. Due to this the high beam of the vehicles coming from the front stops till the driver can see and due to this a big accident happens. Because the effect of these high beam lights directly falls on your eyes. Due to this, you stop seeing for some time and in such a situation a big accident can happen. A heavy challan of the police can also be deducted for driving in the wrong direction. Therefore, driving in the wrong direction should always be avoided.
  • Indicate the vehicle in front by using Dipper: When we are driving at night and any vehicle is coming from the front with high beam lights, then we should use a dipper Should give. So that the person in front can understand that we are having trouble due to these lights. So that the driver of the vehicle in front can turn down his high beam light.
  • In such a time, a major tool with the driver is in the form of Deeper. This dipper is used to signal the oncoming vehicle from the front. We should use this dipper if any vehicle is coming with a high beam from the front so that it should turn off its lights. And we could drive our car without any hassle. But many times it is seen that there are many drivers who do not care about the dipper and they drive with their high beam only. In such a situation, we should drive carefully by holding one side of the road.
  • The windshield should be kept very clean: – During the journey at night, we should keep the windshield very clean so that the front can be seen very clearly. The clean windshield also protects us from high beams to some extent.

Also read: SBI Launched its Brand New Contact Centre for its Customers

LEAVE A REPLY

Please enter your comment!
Please enter your name here